Vax SpinScrub Power Plus CDCW-SSXA Carpet Cleaner

Introduction

Thank you for choosing the Vax SpinScrub Power Plus Carpet Cleaner. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new carpet cleaner. Please read it thoroughly before first use and retain it for future reference.

The Vax SpinScrub Power Plus is designed to deliver a deep clean to your carpets, removing tough stains and refreshing the pile. Its advanced features, including SpinScrub brushes, XL capacity tanks, and HEATBLAST technology, ensure efficient and quick cleaning results.

Image: The Vax SpinScrub Power Plus Carpet Cleaner shown with its included SpinScrub hand tool and upholstery tool.

Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury.

• Read all instructions before using the appliance.
• Use only as described in this manual.
• Do not leave the appliance unattended when plugged in. Unplug from outlet when not in use and before servicing.
• Do not use with a damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Use extra care when cleaning on stairs.
• Do not use without tanks in place.
• Connect to a properly grounded outlet only. See grounding instructions.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.

Your Vax SpinScrub Power Plus Carpet Cleaner package should include the following items:

• Vax SpinScrub Power Plus Carpet Cleaner Unit
• SpinScrub Hand Tool
• Upholstery Tool
• 2.5m Long Hose
• Vax Platinum Antibacterial Solution (sample bottle)
• User Manual (this document)

Image: Front view of the Vax SpinScrub Power Plus Carpet Cleaner, highlighting its main components.

Setup

1. Assembling the Unit

1. Carefully remove all components from the packaging.
2. Insert the handle assembly into the main body of the cleaner until it clicks securely into place.
3. Ensure both the clean water tank and dirty water tank are correctly seated in their respective positions.

2. Filling the Clean Water Tank

• Remove the clean water tank from the unit.
• Unscrew the cap and fill the tank with warm tap water up to the indicated 'Water Fill' line.
• Add the recommended amount of Vax carpet cleaning solution to the dedicated solution compartment, as per the solution bottle instructions. The Automix Technology will ensure correct dilution.
• Securely replace the cap and reinsert the clean water tank into the cleaner until it locks.

Image: Demonstrates filling the dedicated solution tank, highlighting the Automix Technology.

Operating Instructions

1. Preparing the Area

• Vacuum the carpet thoroughly to remove loose dirt and debris.
• Move furniture out of the area to be cleaned.
• Test a small, inconspicuous area of the carpet for colorfastness before full use.

2. Deep Cleaning Carpets

1. Plug the cleaner into a grounded electrical outlet.
2. Select the 'Deep Clean' mode using the dial on the side of the unit.
3. Press the power button to turn on the machine.
4. Push the cleaner forward slowly, pressing the trigger to release cleaning solution.
5. Pull the cleaner backward slowly over the same area without pressing the trigger to extract the dirty solution.
6. Overlap each pass slightly to ensure thorough cleaning.
7. Continue until the entire area is cleaned or the dirty water tank is full/clean water tank is empty.

Image: A person using the Vax SpinScrub Power Plus to clean a carpet, demonstrating the wide cleaning path.

Image: Detailed view of the SpinScrub brushes in action, showing how they penetrate deep into carpet fibers to remove dirt.

3. Quick Dry with HEATBLAST Technology

After deep cleaning, you can activate the HEATBLAST technology for faster drying.

• After completing your cleaning passes, continue to pull the cleaner backward over the wet areas without pressing the trigger.
• The HEATBLAST technology will apply warm air and powerful extraction to significantly reduce drying time, often to as little as 1 hour.

Image: The Vax SpinScrub Power Plus in a room, illustrating the quick drying capability of its HEATBLAST technology.

4. Above Floor Cleaning (Hose & Tools)

For stairs, upholstery, and other hard-to-reach areas, use the included hose and tools.

1. Ensure the main unit is powered off and unplugged.
2. Attach the 2.5m hose to the designated port on the cleaner.
3. Connect either the SpinScrub Hand Tool or the Upholstery Tool to the end of the hose.
4. Plug the cleaner back in and power it on.
5. Press the trigger on the hand tool to spray solution and scrub the surface. Release the trigger and pull the tool over the area to extract.
6. After use, detach the hose and tools and clean them thoroughly.

Image: Composite image showing the SpinScrub Hand Tool being used on stairs and the Upholstery Tool on a sofa, demonstrating the versatility of above-floor cleaning.

Image: Close-up of the SpinScrub Hand Tool effectively cleaning carpeted stairs, showing its rotating brush action.

Maintenance

Regular maintenance ensures optimal performance and extends the life of your Vax SpinScrub Power Plus.

1. Emptying and Cleaning Dirty Water Tank

• After each use, or when the dirty water tank reaches its maximum fill line, remove it from the unit.
• Carefully open the tank and pour out the dirty water.
• Rinse the tank thoroughly with clean water.
• Allow the tank to air dry completely before reattaching it to the cleaner.

2. Cleaning the Brushes and Nozzle

• Turn off and unplug the cleaner.
• Remove the clear nozzle cover and the SpinScrub brush assembly from the base of the unit.
• Rinse the brushes and nozzle under running water to remove any trapped hair or debris.
• Ensure all parts are clean and free of obstructions.
• Reassemble the brushes and nozzle, ensuring they click securely into place.

Image: Shows the easy post-use maintenance, including the removal of the clear nozzle and brush assembly for cleaning.

3. Storing the Cleaner

• Ensure all tanks are empty and clean, and all components are dry before storage.
• Store the cleaner in a dry, indoor area, away from extreme temperatures.
• Wrap the power cord neatly around the cord hooks.

Troubleshooting

Specifications